hey guys just joined this forum hope you can help steer me in the right direction. i just finished building my first e bike and am very happy with it. i installed the bbshd (hot rod mode) from luna cycles on a ascend moher bike from cabelas . it is a 1 by ten speed and has plenty of torque im looking to get a little more speed out of it. i currently have a 30 tooth chain ring and have orderd a 34 tooth for the bbshd. that is the biggest i have room for so i am looking to replace my rear cassette with a 10/50 wide narrow. my current cassette is a 11/48. any idea where i can find one or one with even a better range like a 9/52 if such a thing exist thanks guys. also if interested i will tell you how i fit the bbshd (100 mm) bb with chainstay interferance. thanks again
top of page
bottom of page
hey guys here is the challenge can i replace my 11 tooth cog with a 9 tooth and replace my 48 tooth cog with a 52 tooth on my ten speed cassette to increase range of a 1 by ten
yup I would also suggest a larger front ring, I personally went with a 48t front ring for my 7speed rear 11-32? not sure didnt count the teeth. it will push my 750w to over 33mph as well as clime decent hills with my assist.
theres a 12s 10-52t cassette from sram, xg-1275, but that all depends on if your wheel can even accept it. chainring also depends on offset, for fat bikes like u have, a 36t lekkie may do the trick, but if you want more top speed and dont need climbing torque so much, u can go for a 42T which is pretty good all around, has a larger offset.