I modified 2 bikes. One with BBS02 and other with BBSHD. The Jumbo Shark 48 volt, 24.5ah battery fully charges and the lights on the side of the battery light up and show a full charge. However on both the DPC18 or C500 displays, battery charge never shows higher than 68 %. On the 52 volt, 6ah saddle bag battery, it shows a charge of 100% on either display After a full charge. Am I doing something wrong with the Jumbo Shark battery or is that just the way it is? You can’t insult me. I’m a newbie to this hobby.
top of page
bottom of page
I will double-check the display controller settings. Thank you for responding.
I would guess that your display/controller reading is set to a 52 volt battery. A 48 volt will never show 100% if the display/controller is set to 52 volt and you use a 48 volt battery. If it bothers you, you would have to get into programing the controller. I think the EggRider display lets you choose 3 different batteries so if changing back and forth from different voltages is important, it may be a good option.