Greetings!
I recently had one of the small circular magnets for the hydraulic brake sensor shatter into pieces. Can anyone recommend a place I might be able to find a suitable replacement? The closest thing I can find is an N52 3/8"x"1/8x"1/8 with a countersunk hole. I'm a bit confused on whether I need an axially or diametrically magnetized replacement.
Thanks in advance!
ive found these to work as great drop in replacement magnets, works with my glued on sensors perfectly. cheers
https://www.kjmagnetics.com/proddetail.asp?prod=R622
@1fitz Thanks a million! Your a life saver! 😁 Those magnets are exact replacements! You just saved me both time and money! Much appreciated!
I used one of those countersunk mags on my brake. Carefully drill a hole the correct size and use a thread cutting screw with a bit of oil. I had to grind the tip of the screw off after the threading operation so it wouldn't interfere with the brake frame. A dab of locktite is a good idea. The screw I used is very small and came out of an old printer that I tore down for parts.